SMALL, VERSATILE AND POWERFUL...IT'S THE FINEST COMPACT SPACE HEATER AVAILABLE.
THE ULTIMATE COMPACT SPACE HEATER
Leave it to our engineers to improve upon perfection. They've taken the best compact
space heater in the industry, our Hide-A-Vector, and made it even better. Our new
Hide-A-Vector2 provides more heat in less space while offering additional features,
including a two-speed fan control, a smaller footprint and a totally enclosed housing.
All of these make Hide-A-Vector2 the ideal choice when space prohibits the installation
of traditional baseboard.
CHOOSE THE MODEL THAT BEST MEETS YOUR NEEDS
Hide-A-Vector2 is UL listed and is available in two sizes. Model 48 produces 4800 BTU/Hr.
and is ideal for normal heating requirements. Model 88 produces 8800 BTU/Hr. and is
designed for greater heating loads. These units provide coverage for a wide array of
TWO SPEED CONTROL FOR ADDED FLEXIBILITY
With its choice of low and high speeds, Hide-A-Vector2 offers flexibility in selecting
your comfort level. Choose either the quieter low speed or the full output high speed.
A typical bathroom can be heated using the low speed setting on the model 48 (HAV-48-2).
ENCLOSED HOUSING ADDS PROTECTION
Hide-A-Vector2 has a new, totally enclosed housing of thick galvanized steel,
which protects its components during installation and operation. This rugged housing
also helps to reduce noise.
SIMPLIFIED ECONOMICAL INSTALLATION
Each Hide-A-Vector2 is shipped ready for easy installation. Just connect the 1/2"
copper supply inlet and the return outlet to the hot water heating system and then
connect the wires from the factory-supplied junction box to normal 120 volt household
wiring. That's all it takes, fast and easy.
INSTALL IT VIRTUALLY ANYWHERE
With its sleek, self-contained housing and smaller footprint, Hide-A-Vector2 is 38%
smaller than the original model. This makes it ideal for installation under kitchen
cabinets, beneath bathroom vanities, in stair risers, in front of sliding glass doors
or even bookcases. Hide-A-Vector2's ease of installation also makes it the ideal choice
to heat finished basements, attic room additions, entrance ways, mud rooms, workshops
and laundry rooms.
FULLY AUTOMATIC OPERATION
A thermostatically controlled motor starts the blower as soon as hot water begins
flowing through the Hide-A-Vector2 heating coil. As an integral part of the central
hot water system, Hide-A-Vector2 can either be piped as part of a baseboard circuit
or zoned individually.
Recessed Wall Unit
Hide-A-Vector2 can be installed in a recessed cabinet for vertical applications.
Our exclusive cabinet design maintains a high BTU output and installs flush to the
wall to maximize space in small rooms and narrow passageways.
For additional flexibility, Hide-A-Vector2 can be installed in the floor.
This is ideal for heating areas around entrance ways and sliding doors.
Enjoy fingertip control with the optional Hide-A-Vector2 control switch.
This multi-speed control allows you to dial the precise amount of heat required.
It comes pre-assembled and fits easily into any standard wall junction box.