THE ULTIMATE COMPACT SPACE HEATER
Leave it to our engineers to improve upon perfection. They've taken the best compact space heater in the industry, our Hide-A-Vector, and made it even better. Our new Hide-A-Vector2 provides more heat in less space while offering additional features, including a two-speed fan control, a smaller footprint and a totally enclosed housing. All of these make Hide-A-Vector2 the ideal choice when space prohibits the installation of traditional baseboard.

CHOOSE THE MODEL THAT BEST MEETS YOUR NEEDS
Hide-A-Vector2 is UL listed and is available in two sizes. Model 48 produces 4800 BTU/Hr. and is ideal for normal heating requirements. Model 88 produces 8800 BTU/Hr. and is designed for greater heating loads. These units provide coverage for a wide array of heating needs.

TWO SPEED CONTROL FOR ADDED FLEXIBILITY
With its choice of low and high speeds, Hide-A-Vector2 offers flexibility in selecting your comfort level. Choose either the quieter low speed or the full output high speed. A typical bathroom can be heated using the low speed setting on the model 48 (HAV-48-2).

ENCLOSED HOUSING ADDS PROTECTION
Hide-A-Vector2 has a new, totally enclosed housing of thick galvanized steel, which protects its components during installation and operation. This rugged housing also helps to reduce noise.

SIMPLIFIED ECONOMICAL INSTALLATION
Each Hide-A-Vector2 is shipped ready for easy installation. Just connect the 1/2" copper supply inlet and the return outlet to the hot water heating system and then connect the wires from the factory-supplied junction box to normal 120 volt household wiring. That's all it takes, fast and easy.

INSTALL IT VIRTUALLY ANYWHERE
With its sleek, self-contained housing and smaller footprint, Hide-A-Vector2 is 38% smaller than the original model. This makes it ideal for installation under kitchen cabinets, beneath bathroom vanities, in stair risers, in front of sliding glass doors or even bookcases. Hide-A-Vector2's ease of installation also makes it the ideal choice to heat finished basements, attic room additions, entrance ways, mud rooms, workshops and laundry rooms.

FULLY AUTOMATIC OPERATION
A thermostatically controlled motor starts the blower as soon as hot water begins flowing through the Hide-A-Vector2 heating coil. As an integral part of the central hot water system, Hide-A-Vector2 can either be piped as part of a baseboard circuit or zoned individually.

Recessed Wall Unit
Hide-A-Vector2 can be installed in a recessed cabinet for vertical applications. Our exclusive cabinet design maintains a high BTU output and installs flush to the wall to maximize space in small rooms and narrow passageways.

Floor Unit
For additional flexibility, Hide-A-Vector2 can be installed in the floor. This is ideal for heating areas around entrance ways and sliding doors.

Speed Control
Enjoy fingertip control with the optional Hide-A-Vector2 control switch. This multi-speed control allows you to dial the precise amount of heat required. It comes pre-assembled and fits easily into any standard wall junction box.